Robotic End-Effector Impedance Control without Expensive Torque/Force Sensor

Authors: Shiuh-Jer Huang, Yu-Chi Liu, Su-Hai Hsiang

Abstract:

A novel low-cost impedance control structure is proposed for monitoring the contact force between end-effector and environment without installing an expensive force/torque sensor. Theoretically, the end-effector contact force can be estimated from the superposition of each joint control torque. There have a nonlinear matrix mapping function between each joint motor control input and end-effector actuating force/torques vector. This new force control structure can be implemented based on this estimated mapping matrix. First, the robot end-effector is manipulated to specified positions, then the force controller is actuated based on the hall sensor current feedback of each joint motor. The model-free fuzzy sliding mode control (FSMC) strategy is employed to design the position and force controllers, respectively. All the hardware circuits and software control programs are designed on an Altera Nios II embedded development kit to constitute an embedded system structure for a retrofitted Mitsubishi 5 DOF robot. Experimental results show that PI and FSMC force control algorithms can achieve reasonable contact force monitoring objective based on this hardware control structure.

Keywords: Robot, impedance control, fuzzy sliding mode control, contact force estimator.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1087175

References:

[1] N. Hogan, “Impedance control: An approach to manipulator, Parts I, II, and III,” ASME J. Dynam. Syst., Meas., Contr., vol. 107, pp. 1–24, Mar. 1985.
[2] Seul Jung and T. C. Hsia, “Neural network impedance force control of robot manipulators,” IEEE Trans. Ind. Electron., vol. 45, no. 2, pp. 451–461, 1998.
[3] S. Jung, T. C. Hsia and R. G. Bonitz, “Force tracking impedance control of robot manipulator under unknown environment,” IEEE Trans. On Control System Technology, Vol. 12, No. 3, pp. 474-483, 2004.
[4] Matthew Mason, “Compliance and force control for computer controlled manipulator,” IEEE Trans. On System, Man and Cybernetics, SMC-11, No. 6, pp. 418-432, 1981.
[5] M. H. Raibert and J. J. Craig, “Hybrid position and force control of robot manipulators,” ASME J. Dynam. Syst., Meas., Contr., vol. 102, pp. 126–133, June 1981.
[6] Shimoga B. Karunakar and Andrew A. Goldenberg, “Contact stability in model-based force control systems of robot manipulators,” IEEE International Symposium on Intelligent Control, pp. 412-417, Arlington, Virginia, August, 1988.
[7] G. Ferretti, G. Magnani and P. Rocco, “Toward the implementation of hybrid position/force control in industrial robots,” IEEE Trans. on Robotics and Automation, Vol. 13, No. 6, pp. 838-845, 1997.
[8] G. Ferretti, G. Magnani and P. Rocco, “Impedance control for elastic joints industrial manipulators,” IEEE Trans. On Robotics and Automation, Vol. 20, No. 3, pp. 488-498, 2004.
[9] James K. Mills and Andrew A. Goldenberg, “Force and position control of manipulators during constrained motion tasks,” IEEE Trans. On Robotics and Automation, Vol. 5, No. 1, pp. 30-46, 1989.
[10] L.T. Wang and C.C. Chen, “A Combined optimization Method for Solving the Inverse Kinematics Problem of Mechanical Manipulator,” IEEE Trans. On Robotics and Automation Vol.7, No. 4, pp. 489-499, 1991.
[11] K. Kazerounian, “On the Numerical Inverse Kinematics of Robotic Manipulator,” AMSE J of Mechanisms, Transmissions and Automation in Design, Vol.109, pp. 8-13，March 1987.
[12] Edwards Ch. And Spurgeon S. K., Sliding Mode Control – Theory and Applications, Taylor &Francis Ltd., London, Bristol, 1998.
[13] Shiuh-Jer Huang and Wei-Cheng Lin, 2003, “Adaptive Fuzzy Controller with Sliding Surface for Vehicle Suspension Control,” IEEE Transactions on Fuzzy Systems, Vol. 11, No. 4, pp. 550-559.
[14] Hwang G. C. and Lin S. C., “A stability approach to fuzzy control design for nonlinear systems,” Fuzzy Sets Systems, Vel 48, pp.269-278, 1992.