Design, Fabrication and Performance Evaluation of Mobile Engine-Driven Pneumatic Paddy Collector

Authors: Sony P. Aquino, Helen F. Gavino, Victorino T. Taylan, Teresito G. Aguinaldo

Abstract:

A simple mobile engine-driven pneumatic paddy collector made of locally available materials using local manufacturing technology was designed, fabricated, and tested for collecting and bagging of paddy dried on concrete pavement. The pneumatic paddy collector had the following major components: radial flat bladed type centrifugal fan, power transmission system, bagging area, frame and the conveyance system. Results showed significant differences on the collecting capacity, noise level, and fuel consumption when rotational speed of the air mover shaft was varied. Other parameters such as collecting efficiency, air velocity, augmented cracked grain percentage, and germination rate were not significantly affected by varying rotational speed of the air mover shaft. The pneumatic paddy collector had a collecting efficiency of 99.33 % with a collecting capacity of 2685.00 kg/h at maximum rotational speed of centrifugal fan shaft of about 4200 rpm. The machine entailed an investment cost of P 62,829.25. The break-even weight of paddy was 510,606.75 kg/yr at a collecting cost of 0.11 P/kg of paddy. Utilizing the machine for 400 hours per year generated an income of P 23,887.73. The projected time needed to recover cost of the machine based on 2685 kg/h collecting capacity was 2.63 year.

Keywords: Mobile engine-driven pneumatic paddy collector, collecting capacity and efficiency, simple cost analysis.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1086717

References:

[1] A. Rajabipour, Ahmad Tabatabaeefar, and Mehdi Farahani, “Moisturedependent Terminal Velocity of Wheat and Rice Varieties,” Retrieved on January 2013 at http// www.asabe.org Michigan.
[2] A. V. Angeles, “Design construction and performance test of a clay extruder machine for small scale brick making. Unpublished MS thesis in Agricultural Engineering,” UPLB, Los Baños Laguna, Philippines, 1987.
[3] Agricultural Machinery Testing And Evaluation Center, “Hazard of agricultural machinery use in the Philippines,” Retrieved on March 12, 2013 at www.unapcaem.org/ Activities% 20Files/A1205AS/ PPT/ph01.pdf. Los Baños, Laguna, Philippines, 2012.
[4] D. R. Hunt, “Farm power and machinery management,” 10th ed., Iowa State University Press, Ames, Iowa, 2001.
[5] E. P. Santiago, “Design and development of grain paddy collecting machine,” Unpublished MS thesis in Agricultural Engineering, CLSU, Science City of Munoz, Nueva Ecija, 1995.
[6] F. C. Omar, D. C. Suministrado, A. N. Resurrection, R. C. Amongo, F. O. Paras Jr., and M. C. Petingco, “Anthropometry of male farmers in Laguna, Philippines and its potential applications in the design of agricultural machines and tools,” Phil. Jour. Agr. & Biosystem Eng., Vol. 8, no. pp: 47-58, 2007.
[7] International Monetary Fund (IMF),” Philippine population,” Retrieved on December, 2011 at http://www.tradingeconomics .com/ philippines/population-imf-data.html. Malate, Manila, Philippines.
[8] International Research Institute (IRRI), “Paddy drying manual,” Retrieved on November 19, 2011 at http://www.knowledgebank. irri.org/.../Drying. Los Baños, Laguna, Philippines.
[9] International Research Institute (IRRI), “Training manual in grain storage,” Retrieved on January 30, 2011 at http://www.knowledgebank .irri.orgericeproduction/PDF_&_Docs/Training_Manual_Grain_Storage. pdf. Los Baños, Laguna, Philippines.
[10] Kongskilde Industries, “Suction blowers pneumatic conveyors,” Retrieved on December 30, 2011 at http://www. Kongskilde .com. Denmark.
[11] L. Q. Vinh, “Comparative study of the performance of the reversible airflow dryer and the conventional flatbed dryer,” Unpublished MS thesis in Agricultural Engineering, CLSU, Science City of Munoz, Nueva Ecija, 2011.
[12] M. Gragasin, “The economics of rice drying technology in the Philippines,” Retrieved on December 2011 at http://www.pcarrd.dost.gov.ph/ CIN/agmachin/ index.php?option =com_ content&view=article&id=366:crop-processing-&catid =134 Bureau of Postharvest Research and Extension (BPRE), Science City of Munoz, Nueva Ecija.
[13] Philippine Agricultural Engineering Standards, PAES 301:2000, Engineering materials: V-belt and pulleys for agricultural machines - Specifications and application.
[14] R. M. Mojica, E. K. Peralta ,and J. C. Elauria, “Design, Fabrication and performance evaluation of a batch-fed coffee roaster for small-scale roasting,” Phil. Jour. Agr. & Biosystem Eng, Vol. 8, no. 1, pp: 3-19, 2010.
[15] S. M. Henderson, and R. L. Perry, Agricultural process engineering,3rd ed. Connecticut. The AVI Publishing Company, Inc., 1976, p 193.
[16] Walinga INC., “The 3510 Agric-Vac (Brochure),” Retrieved on December 22, 2011 at http://www.walinga.com. Alberta, Canada.