WASET
	@article{(Open Science Index):https://publications.waset.org/pdf/14559,
	  title     = {Experimental Measurements of the Mean Flow Field in Wide-Angled Diffusers: A Data Bank Contribution},
	  author    = {Karanja Kibicho and  Anthony Sayers},
	  country	= {},
	  institution	= {},
	  abstract     = {Due to adverse pressure gradient along the diverging
walls of wide-angled diffusers, the attached flow separates from
one wall and remains attached permanently to the other wall in a
process called stalling. Stalled diffusers render the whole fluid flow
system, in which they are part of, very inefficient. There is then an
engineering need to try to understand the whole process of diffuser
stall if any meaningful attempts to improve on diffuser efficiency
are to be made. In this regard, this paper provides a data bank
contribution for the mean flow-field in wide-angled diffusers where
the complete velocity and static pressure fields, and pressure recovery
data for diffusers in the fully stalled flow regime are experimentally
measured. The measurements were carried out at Reynolds numbers
between 1.07×105 and 2.14×105 based on inlet hydraulic diameter
and centreline velocity for diffusers whose divergence angles were
between 30Ôùª and 50Ôùª. Variation of Reynolds number did not significantly
affect the velocity and static pressure profiles. The wall static
pressure recovery was found to be more sensitive to changes in the
Reynolds number. By increasing the velocity from 10 m/s to 20 m/s,
the wall static pressure recovery increased by 8.31%. However, as the
divergence angle was increased, a similar increase in the Reynolds
number resulted in a higher percentage increase in pressure recovery.
Experimental results showed that regardless of the wall to which
the flow was attached, both the velocity and pressure fields were
replicated with discrepancies below 2%.},
	    journal   = {International Journal of Mechanical and Mechatronics Engineering},
	  volume    = {2},
	  number    = {7},
	  year      = {2008},
	  pages     = {913 - 918},
	  ee        = {https://publications.waset.org/pdf/14559},
	  url   	= {https://publications.waset.org/vol/19},
	  bibsource = {https://publications.waset.org/},
	  issn  	= {eISSN: 1307-6892},
	  publisher = {World Academy of Science, Engineering and Technology},
	  index 	= {Open Science Index 19, 2008},
	}