@article{(Open Science Index):https://publications.waset.org/pdf/11886, title = {A New Controlling Parameter in Design of Above Knee Prosthesis}, author = {M. Tahani and G. Karimi}, country = {}, institution = {}, abstract = {In this paper after reviewing some previous studies, in order to optimize the above knee prosthesis, beside the inertial properties a new controlling parameter is informed. This controlling parameter makes the prosthesis able to act as a multi behavior system when the amputee is opposing to different environments. This active prosthesis with the new controlling parameter can simplify the control of prosthesis and reduce the rate of energy consumption in comparison to recently presented similar prosthesis “Agonistantagonist active knee prosthesis". In this paper three models are generated, a passive, an active, and an optimized active prosthesis. Second order Taylor series is the numerical method in solution of the models equations and the optimization procedure is genetic algorithm. Modeling the prosthesis which comprises this new controlling parameter (SEP) during the swing phase represents acceptable results in comparison to natural behavior of shank. Reported results in this paper represent 3.3 degrees as the maximum deviation of models shank angle from the natural pattern. The natural gait pattern belongs to walking at the speed of 81 m/min.}, journal = {International Journal of Mechanical and Mechatronics Engineering}, volume = {4}, number = {10}, year = {2010}, pages = {1118 - 1125}, ee = {https://publications.waset.org/pdf/11886}, url = {https://publications.waset.org/vol/46}, bibsource = {https://publications.waset.org/}, issn = {eISSN: 1307-6892}, publisher = {World Academy of Science, Engineering and Technology}, index = {Open Science Index 46, 2010}, }