Principal Type of Water Responsible for Damage of Concrete Repeated Freeze-Thaw Cycles
Commenced in January 2007
Frequency: Monthly
Edition: International
Paper Count: 32799
Principal Type of Water Responsible for Damage of Concrete Repeated Freeze-Thaw Cycles

Authors: L. Dahmani

Abstract:

The first and basic cause of the failure of concrete is repeated freezing (thawing) of moisture contained in the pores, microcracks, and cavities of the concrete. On transition to ice, water existing in the free state in cracks increases in volume, expanding the recess in which freezing occurs. A reduction in strength below the initial value is to be expected and further cycle of freezing and thawing have a further marked effect. By using some experimental parameters like nuclear magnetic resonance variation (NMR), enthalpy-temperature (or heat capacity) variation, we can resolve between the various water states and their effect on concrete properties during cooling through the freezing transition temperature range. The main objective of this paper is to describe the principal type of water responsible for the reduction in strength and structural damage (frost damage) of concrete following repeated freeze –thaw cycles. Some experimental work was carried out at the institute of cryogenics to determine what happens to water in concrete during the freezing transition. 

Keywords: Concrete, frost proof, strength, water diffusion.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1074749

Procedia APA BibTeX Chicago EndNote Harvard JSON MLA RIS XML ISO 690 PDF Downloads 1753

References:


[1] CALLAGHAN, P.T., “Principles of Nuclear Magnetic Resonance Microscopy”, Oxford Science Publications, 1991, New York.
[2] Dahmani, L., Khennane, A., Kaci,S. , “Behavior of the reinforced concrete at cryogenic temperature”, Cryogenics , Volume 47, Issues 9- 10, September-October 2007, Pages 517-525.
[3] GEIKER, M; THAULOW, N, “Ingress of Moisture due to Freeze/Thaw Exposure”, in ,Frost Resistance of Building Materials, Ed. S. Lindmark, Report TVBM-3072, Lund Institute of Technology, Div. Building Materials, 1996.
[4] HANAOR A. , Microcracking and permeability of concrete to Liquide Nitrogen , J. Am. Concr. Institute, 1985.
[5] HANSEN, E.W; STOCKER, M.; and SCHMIDT,R., Low-temperature phase transition of water confined in mesopores probed by NMR. Influence on pore size distribution, J. Phys. Chem., vol. 100, pp. 2195– 2200, 1996.
[6] HEDENBLAD, G. , “Moisture Permeability of Mature Concrete, Cement Mortar and Cement Paste”, Lund Institute of Technology, Div. of Building Materials, Report TVBM-1014, 1993.
[7] MARCHAND, J. ; PLEAU, R.; GAGNÉ, R. , “Deterioration of Concrete Due to Freezing and Thawing” , in Materials Science of Concrete IV. Jan Skalny, Sidney Mindess, Eds.,1995.
[8] MOHD YUSOF ,K.B., “The effects of moisture on the thermal properties of concrete between -80 degrees and 0 degrees C”, University of Southampton, UK, Ph.D. thesis, 1984.
[9] PEL, L., “Moisture Transport in Porous Building Materials”, Ph.D. thesis, Eindhoven University of Technology, 1995.
[10] PIGEON, M. ; and PLEAU, R., “Durability of Concrete in Cold Climates”. London: Chapman and Hall, 1995.
[11] PRADO P. J., BALCOM B. J., BEYEA S. D., BREMNER T. W., ARMSTRONG R. L. and GRATTAN-BELLEW P. E., “Concrete freeze/thaw as studied by magnetic resonance imaging". Cement and Concrete Research, 28, No. 2, 261–270, 1998.
[12] SCURLOCK , R.G.; and KAMARUDIN M.YUSOF, “Thermal behaviour of concretes between -80degrees C and +20 degrees C” Proc. 2nd Int Conf Cryogenic Concrete, Amsterdam, 1983.
[13] SCURLOCK , R.G.; and MOHD YUSOF, K.B.; (2000] ,” Cryogenic and Frostproof Concrete made from conventional aggregates and Portland cement”, Adv. Cryo. Engineering 45, 1779, 2000.
[14] SCURLOCK, R.G.; LOW LOSS DEWARS,”Cryogenic and Frostproof Concrete”, 35-37, Low Loss Dewars and Tanks, published by Cryogenic Society of America, 2005.
[15] SCURLOCK, R.G., “Cryogenics at the University of Southampton: a review”, Institute of Cryogenics, University of Southampton, Southampton S09 5N H, U K, (19 February), pp.439-466, 1988.
[16] WOLTER B, DOBMANN G, “Nuclear magnetic resonance as a tool for the characterisation of concrete in different stages of its development”. Proc. Int. Symp. on Non-Destructive Testing in Civil Engineering (NDT-CE), Vol. 1, Berlin, Germany, p. 181, 1995.