Fabrication and Characterization of Al2O3 Based Electrical Insulation Coatings Around SiC Fibers
Commenced in January 2007
Frequency: Monthly
Edition: International
Paper Count: 32799
Fabrication and Characterization of Al2O3 Based Electrical Insulation Coatings Around SiC Fibers

Authors: S. Palaniyappan, P. K. Chennam, M. Trautmann, H. Ahmad, T. Mehner, T. Lampke, G. Wagner

Abstract:

In structural-health monitoring of fiber reinforced plastics (FRPs), every single inorganic fiber sensor that are integrated into the bulk material requires an electrical insulation around itself, when the surrounding reinforcing fibers are electrically conductive. This results in a more accurate data acquisition only from the sensor fiber without any electrical interventions. For this purpose, thin nano-films of aluminium oxide (Al2O3)-based electrical-insulation coatings have been fabricated around the Silicon Carbide (SiC) single fiber sensors through reactive DC magnetron sputtering technique. The sputtered coatings were amorphous in nature and the thickness of the coatings increased with an increase in the sputter time. Microstructural characterization of the coated fibers performed using scanning electron microscopy (SEM) confirmed a homogeneous circumferential coating with no detectable defects or cracks on the surface. X-ray diffraction (XRD) analyses of the as-sputtered and 2 hours annealed coatings (825 & 1125 ˚C) revealed the amorphous and crystalline phases of Al2O3 respectively. Raman spectroscopic analyses produced no characteristic bands of Al2O3, as the thickness of the films was in the nanometer (nm) range, which is too small to overcome the actual penetration depth of the laser used. In addition, the influence of the insulation coatings on the mechanical properties of the SiC sensor fibers has been analyzed.

Keywords: Al2O3 insulation coating, reactive sputtering, SiC single fiber sensor, single fiber tensile test.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.2643990

Procedia APA BibTeX Chicago EndNote Harvard JSON MLA RIS XML ISO 690 PDF Downloads 862

References:


[1] S. Nauman, Z. Asfar, I. Cristian, C. Loghin, and V. Koncar, “14 - Smart textiles for structural health monitoring of composite structures,” in Smart Textiles and their Applications, V. Koncar, Ed. Oxford: Woodhead Publishing, 2016, pp. 309–328.
[2] C. Cherif, E. Haentzsche, R. Mueller, A. Nocke, M. Huebner, and M. M. B. Hasan, “15 - Carbon fiber sensors embedded in glass fiber-based composites for windmill blades,” in Smart Textiles and their Applications, V. Koncar, Ed. Oxford: Woodhead Publishing, 2016, pp. 329–352.
[3] Landolt-Bornstein, New Series, Group IV, Vol. 5.a, Vol. 7, Springer, Berlin.
[4] J. M. Schneider, W.D. Sproul, A. Matthews, "Reactive Ionized Magnetron Sputtering of Crystalline Alumina coatings", Surf. Coat. Technol. 98, 1473- 1476, 1998.
[5] S. Dutta, S. Ramesh, B. Shankar, and S. Gopalan, “Effect of PVD process parameters on the quality and reliability of thin (10–30 nm) Al2O3 dielectrics,” Applied Nanoscience, vol. 2, no. 1, pp. 1–6, Mar. 2012.
[6] L. Zhang, H. C. Jiang, C. Liu, J. W. Dong, and P. Chow, “Annealing of Al 2 O 3 thin films prepared by atomic layer deposition,” Journal of Physics D: Applied Physics, vol. 40, no. 12, pp. 3707–3713, Jun. 2007.
[7] J. C. Nable, M. K. Gulbinska, M. A. Kmetz, S. L. Suib, and F. S. Galasso, “Aluminum Oxide and Chromium Oxide Coatings on Ceramic Fibers via MOCVD,” Chemistry of Materials, vol. 15, no. 25, pp. 4823–4829, Dec. 2003.
[8] K. Roder et al., “Development of a SiNx-Based Barrier Coating for SiC Fibers,” Materials Science Forum, vol. 825–826, pp. 256–263, Jul. 2015.
[9] T. Mäder, D. Nestler, and B. Wielage, “Strain sensing using single carbon fibers,” p. 7.
[10] H. Oda and T. Ishikawa, “Microstructure and mechanical properties of SiC-polycrystalline fiber and new defect-controlling process,” International Journal of Applied Ceramic Technology, vol. 14, no. 6, pp. 1031–1040, Nov. 2017.
[11] S. Cao, J. Wang, and H. Wang, “Formation mechanism of large SiC grains on SiC fiber surfaces during heat treatment,” CrystEngComm, vol. 18, no. 20, pp. 3674–3682, 2016.
[12] S. Blittersdorf, N. Bahlawane, K. Kohse-Höinghaus, B. Atakan, and J. Müller, “CVD of Al2O3 Thin Films Using Aluminum Tri-isopropoxide,” Chem. Vap. Depos., vol. 9, no. 4, pp. 194–198, 2003.
[13] S. Palaniyappan, T. Ega, G. Wagner, “Influence of nano Roughness on the Electrical resistance of SiC micro fibers”, Poster Contribution, 20. Werkstofftechnischen Kolloquium (WTK 2018), 14-15. March 2018, Chemnitz, Germany.
[14] A. E. Muhsin, Dissertation, “Chemical Vapor Deposition of Aluminium Oxide (Al2O3) and Beta Iron Disilicide (β-FeSi2) Thin Films,” 2007.
[15] S. Nakashima and H. Harima, “Raman Investigation of SiC Polytypes,” physica status solidi (a), vol. 162, no. 1, pp. 39–64, Jul. 1997.
[16] J. Wasyluk, T. S. Perova, S. A. Kukushkin, A. V. Osipov, N. A. Feoktistov, and S. A. Grudinkin, “Raman Investigation of Different Polytypes in SiC Thin Films Grown by Solid-Gas Phase Epitaxy on Si (111) and 6H-SiC Substrates,” Materials Science Forum, vol. 645–648, pp. 359–362, Apr. 2010.
[17] K. N. Kudin, B. Ozbas, H. C. Schniepp, R. K. Prud’homme, I. A. Aksay, and R. Car, “Raman Spectra of Graphite Oxide and Functionalized Graphene Sheets,” Nano Letters, vol. 8, no. 1, pp. 36–41, Jan. 2008.
[18] C. Y. Xu, P. X. Zhang, and L. Yan, “Blue shift of Raman peak from coated TiO2 nanoparticles,” Journal of Raman Spectroscopy, vol. 32, no. 10, pp. 862–865, Oct. 2001.
[19] A. Belkind, A. Freilich, J. Lopez, Z. Zhao, W. Zhu, and K. Becker, “Characterization of pulsed dc magnetron sputtering plasmas,” New J. Phys., vol. 7, pp. 90–90, Apr. 2005.
[20] B. A. Movchan, A. V. Demchishin - Fizika Metallov Metallovedenie, Structure and Properties of thick condensates Of Nickel, Titanium, Tungsten, Aluminum oxides, And Zirconium dioxide In Vacuum 1969.