Cold Model Experimental Research on Particle Velocity Distribution in Gas-Solid Circulating Fluidized Bed for Methanol-to-Olefins Process
Commenced in January 2007
Frequency: Monthly
Edition: International
Paper Count: 32799
Cold Model Experimental Research on Particle Velocity Distribution in Gas-Solid Circulating Fluidized Bed for Methanol-to-Olefins Process

Authors: Yongzheng Li, Hongfang Ma, Qiwen Sun, Haitao Zhang, Weiyong Ying

Abstract:

Radial profiles of particle velocities were investigated in a 6.1m high methanol-to-olefins cold model experimental device using a TSI laser Doppler velocimeter. The effect of axial height on flow development was not obvious in fully developed region under the same operating condition. Superficial gas velocity and solid circulating rate had significant influence on particle velocity in the center region of the riser. Besides, comparisons among rising, descending and average particle velocity were conducted. The particle average velocity was similar to the rising particle velocity and higher than the descending particle velocity in radial locations except the wall region of riser.

Keywords: Circulating fluidized bed, laser doppler velocimeter, particle velocity, radial profile.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1107451

Procedia APA BibTeX Chicago EndNote Harvard JSON MLA RIS XML ISO 690 PDF Downloads 1886

References:


[1] A. Yan and J. Zhu, "Scale-Up Effect of Riser Reactors (1): Axial and Radial Solids Concentration Distribution and Flow Development," Ind. Eng. Chem. Res., vol. 43, pp. 5810-5819, 2004.
[2] J. J. Nieuwland, R. Meijer, J. A. M. Kuipers, and W. P. M. van Swaaij, "Measurements of solids concentration and axial solids velocity in gas-solid two-phase flows," Powder Technol., vol. 87, pp. 127-139, 1996.
[3] A. S. Issangya, D. Bai, H. T. Bi, K. S. Lim, J. Zhu, and J. R. Grace, "Suspension densities in a high-density circulating fluidized bed riser," Chem. Eng. Sci., vol. 54, pp. 5451-5460, 1999.
[4] D. Bai, A. S. Issangya, and J. R. Grace, "Characteristics of Gas-Fluidized Beds in Different Flow Regimes," Ind. Eng. Chem. Res., vol. 38, pp. 803-811, 1999.
[5] Q. Geng, X. Zhu, Y. Liu, Y. Liu, C. Li, and X. You, "Gas–solid flow behavior and contact efficiency in a circulating-turbulent fluidized bed," Powder Technol., vol. 245, pp. 134-145, 2013.
[6] Z. Q. Li, C. N. Wu, F. Wei, and Y. Jin, "Experimental study of high-density gas–solids flow in a new coupled circulating fluidized bed," Powder Technol., vol. 139, pp. 214-220, 2004.
[7] J. H. Pärssinen and J. X. Zhu, "Particle velocity and flow development in a long and high-flux circulating fluidized bed riser," Chem. Eng. Sci., vol. 56, pp. 5295-5303, 2001.
[8] X. Qi, H. Zhu, and J. Zhu, "Demarcation of a new circulating turbulent fluidization regime," AIChE J., vol. 55, pp. 594-611, 2009.
[9] B. Wang, T. Li, Q. W. Sun, W. Y. Ying, and D. Y. Fang, "Experimental Study on Flow Behavior in a Gas-Solid Fluidized Bed for the Methanol-to-Olefins Process," Chem. Eng. Technol., vol. 33, pp. 1591-1600, 2010.
[10] J. H. Pärssinen and J. X. Zhu, "Axial and radial solids distribution in a long and high-flux CFB riser," AIChE J., vol. 47, pp. 2197-2205, 2001.
[11] S. W. Kim, G. Kirbas, H. Bi, C. Jim Lim, and J. R. Grace, "Flow behavior and regime transition in a high-density circulating fluidized bed riser," Chem. Eng. Sci., vol. 59, pp. 3955-3963, 2004.
[12] A. S. Issangya, J. R. Grace, D. Bai, and J. Zhu, "Further measurements of flow dynamics in a high-density circulating fluidized bed riser," Powder Technol., vol. 111, pp. 104-113, 2000.
[13] H. Zhu and J. Zhu, "Gas-solids flow structures in a novel circulating-turbulent fluidized bed," AIChE J., vol. 54, pp. 1213-1223, 2008.
[14] D. Geldart, "Types of gas fluidization," Powder Technol., vol. 7, pp. 285-292, 1973.
[15] A. Yan and J. Zhu, "Scale-up effect of riser reactors: Particle velocity and flow development," AIChE J., vol. 51, pp. 2956-2964, 2005.
[16] A. Yan, J. Ball, and J. Zhu, "Scale-up effect of riser reactors (3) axial and radial solids flux distribution and flow development," Chem. Eng. J., vol. 109, pp. 97-106, 2005.
[17] Y. Tsuji and Y. Morikawa, "LDV measurements of an air-solid two-phase flow in a horizontal pipe," J. Fluid Mech., vol. 120, pp. 385-409, 1982.
[18] Y. Tsuji, Y. Morikawa, and H. Shiomi, "LDV measurements of an air-solid two-phase flow in a vertical pipe," J. Fluid Mech., vol. 139, pp. 417-434, 1984.
[19] Y. Wang, F. Wei, Z. Wang, Y. Jin, and Y. Zhiqing, "Radial profiles of solids concentration and velocity in a very fine particle (36 μm) riser," Powder Technol., vol. 96, pp. 262-266, 1998.
[20] F. Wei, H. Lin, Y. Cheng, Z. Wang, and Y. Jin, "Profiles of particle velocity and solids fraction in a high-density riser," Powder Technol., vol. 100, pp. 183-189, 1998.