@article{(Open Science Index):https://publications.waset.org/pdf/10001003, title = {Improvement on a CNC Gantry Machine Structure Design for Higher Machining Speed Capability}, author = {Ahmed A. D. Sarhan and S. R. Besharaty and Javad Akbaria and M. Hamdi}, country = {}, institution = {}, abstract = {The capability of CNC gantry milling machines in manufacturing long components has caused the expanded use of such machines. On the other hand, the machines’ gantry rigidity can reduce under severe loads or vibration during operation. Indeed, the quality of machining is dependent on the machine’s dynamic behavior throughout the operating process. For this reason, these types of machines have always been used widely and are not efficient. Therefore, they can usually be employed for rough machining and may not produce adequate surface finishing. In this paper, a CNC gantry milling machine with the potential to produce good surface finish has been designed and analyzed. The lowest natural frequency of this machine is 202 Hz corresponding to 12000 rpm at all motion amplitudes with a full range of suitable frequency responses. Meanwhile, the maximum deformation under dead loads for the gantry machine is 0.565*m, indicating that this machine tool is capable of producing higher product quality. }, journal = {International Journal of Mechanical and Mechatronics Engineering}, volume = {9}, number = {4}, year = {2015}, pages = {577 - 581}, ee = {https://publications.waset.org/pdf/10001003}, url = {https://publications.waset.org/vol/100}, bibsource = {https://publications.waset.org/}, issn = {eISSN: 1307-6892}, publisher = {World Academy of Science, Engineering and Technology}, index = {Open Science Index 100, 2015}, }